| Customization: | Available |
|---|---|
| Morphology: | Water Emulsion |
| Application: | Construction, Woodworking, Fiber & Garment, Packing |
|
Still deciding? Get samples of US$ 3/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Polymer Model:
HN-106, Water-based styrene acrylic copolymer
HN-106 Applications:
interior and exterior wall paints
HN-106 Features:
Styrene acrylic copolymer emulsion
Excellent scrubbing resistance
Water and alkali resistance
Good shear stability
Eco friendly
Styrene acrylic polymer wall paint is known for its durability and weather resistance. Here's a brief guide for use:
Surface Preparation: Clean the walls thoroughly to remove dirt, grease, and loose paint. Repair any cracks or imperfections.
Mixing: Stir the paint well before use to ensure a uniform consistency. If needed, thin with water according to the manufacturer's instructions.
Application: Use a roller or brush to apply the paint evenly. Start from the top and work your way down, maintaining a wet edge to avoid lap marks.
Drying: Allow the first coat to dry completely before applying a second coat. Drying times may vary based on temperature and humidity.
Cleanup: Clean brushes and rollers with water immediately after use. Store any leftover paint in a sealed container.
Following these steps will help achieve a smooth, long-lasting finish with styrene acrylic polymer paint.
| Model | HN-106 Water-based styrene acrylic polymer for interior and exterior wall paints. |
| Appearance | Light blue liquid |
| Solid content | 47%+-1% |
| Viscosity.cps | 1000-5000cps |
| PH | 7.0-8.0 |
| Glass Transition Temperature (Tg) | 16oC |
| Minimum Film FOrmation Temperature (MFT) | 40oC |
| Ca2+ stability: 5% CaCl2:emulsion=1:3, 48h, No Flocculation, No Stratication |
Pass |
1. For building coating application
- HN-103 for interior and exterior wall paints
- HN-4208/4208A for stone-like paints
- HN-9301C/HN-9311S for multi-color wall paints
- HN-01F for wall primers
- HN-314T/519T for wall putties
- HN-3050 for single component waterproof coatings
- HN-3527 for 2-part cement based waterproof coatings
- HN-3198 for asphalt based waterproof coatings
2. For sealant adhesives application
- HN-154VE for PVA sealants
- HN-1025 for general waterproof sealants
- HN-166T/167T for high elastic silicone
- HN-168T for transparent elastic silicone
3. Polymer additives
- AT-2000/ATW-2070/ATW2080 Thickening agents
- WP-19/WP-5040 Dispersing agents
4. Textile adhesives application
- HN-5008 for screen pigment pastes/discharge pastes
- HN-501NK for Flexo/gravure inks
- HN-SL530 for wet curtains bonding
- HN-9827 for sponge adhesives
- HN-2108S/3451HF for glass fiber grid cloth hardening adhesives
- HN-YS861 for wallpaper printing inks
- HN-8321 for magic Velcro/hook and loop fastener backing adhesives
- HN-6019 for PSA pressure sensitive adhesives
- HN-PM01 for carpet backing adhesives
- HN-PW01 for polyester wadding adhesives
- HN-MQ603 for wood furniture varnish/lacquer
5. Soil stabilization/dust, sand suppression/erosion control application
- HN-541 for road construction
- HN-130VA for general dust control
- HN-158T for long term dust control
6. Metal anti-rust application
- HN-5119 for metal anti-rust
Packing:
50kgs plastic drum/160kgs plastic drum/200kgs plastic drum/1000kgs IBC pallet/20000kgs soft packing.
Storage and transportation:
1.This chemical should be stored in a ventilated and dry room, avoiding direct sunlight. 2.Transport and store in the 5oC-35oC environment.
3.Shelf life is 1 year from the date of first use.
Safety notice:
The water-based polymer emulsion is non-toxic and non-flammable. If it splashes into the eyes, it should be washed with plenty of water immediately.
Q: Are you a trading company or a manufacturer?
A: We are a manufacturer, not a trading company. Two factories, the headquarters lies in Qingzhou city and the other is in Qingdao city.
Q: How long is your lead time?
A: The normal lead time is 5-10 days. It is according to the quantity and inquires of us before place any orders.
Q: Do you provide free samples? Are the samples free of charge or need to be paid?
A: Yes, Free samples of 0.5-1 kg for each type are available for our customers. The samples are free but the freight is collected.
Q: What are the terms of payment?
A: Full payment is needed in advance before shipment.
Q: How about your research ability? Do you offer technical support services?
A: We have our own research labs and testing labs. Many universities and institutes have built a long-term strategic partnership with us. We offer technical support services for our customers.
Q: Can I place a small order for the first time to test the quality?
A: Yes, you can order 1-5 tons of emulsion polymers to run tests in your factory for the start order.
Q: Can I visit your factory?
A: Yes, you are welcome to visit our production factory in Qingdao or headquarters in Qingzhou.
Q: Do you accept customized orders?
A: Yes, we take customized orders. Please inquire of us before place such orders.
Q: Can you help us develop our own factory in our own country?
A: Yes, we can help our customers to build their own factories in their countries. Please talk with our director about the details.
){kind=link}